Open Access Open Access  Restricted Access Subscription Access

A REVIEW ON INFLUENCE OF CUTTING EDGE MICRO GEOMETRY ON MACHINING

Shiva Pradeep N Padmakumar Muthuswamy Dr. B.N. Sarada

Abstract


Tool geometry is an important criterion that influences the performance of a tool. As the tool geometry has major effect on determining cutting forces, chip formation, tool life and temperature. Recent advancement in metal cutting has derived that the cutting edge geometry that is tool micro geometry also has a major influence on above said parameters. Here the effects of cutting edge micro geometry especially the effects of honed cutting edge on performance of tool have been discussed based on the recent works and the effect of Form factor(K) on cutting tool parameters is focused.


Full Text:

Untitled

References


Albrecht P. New Developments in the Theory of the Metal-Cutting Process. In: ASME Transactions, Journal of Engineering for Industry, Series B, Vol. 82; 1960, p. 348-358

Size effect and tool geometry in micromilling of tool steel A. Aramcharoen∗, P.T. Mativenga ; Manufacturing and Laser Processing Group, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UK

Fang N, Wu Q (2005) The Effects of Chamfered and Honed Tool Edge Geometry in Machining of Three Aluminium Alloys. International Journal of Machine Tools and Manufacture 45:1178–1187.

Wyen C-F, Wegener K (2010) Influence of Cutting Edge Radius on Cutting Forces in Machining Titanium. CIRP Annals 59:93–96.

Thiele J-D, Melkote S-N (1999) Effect of Cutting Edge Geometry and Work-piece Hardness on Surface Generation in the Finish Hard Turning of AISI 52100 Steel. Journal of Materials Processing Technology 94:216–226.

Denkena B, Koehler J, Rehe M (2012) Influence of the Honed Cutting Edge on Tool Wear and Surface Integrity in Slot Milling of 42CrMo4 Steel. 5th CIRP Conf. on High Performance Cutting.

The influence of the cutting tool microgeometry on the machinability of hardened AISI 4140 steel Carlos E. H. Ventura1 &Heitor S. Chaves2 & Juan Carlos Campos Rubio3 &Alexandre M. Abrão3 &Berend Denkena4 & Bernd Breidenstein4

.Bassett E, Ko¨ hler J, Denkena B (2012) On the Honed Cutting Edge and its Side Effects During Orthogonal Turning.

DenkenaB,KöhlerJ,Mengesha MS(2012) Influence of the cutting edge rounding on the chip formation process: part 1. Investigation of material flow, process forces and cutting temperature. Prod Eng Res Devel 6:329–338

Operations of AISI1045 with Coated WC-Co Inserts. CIRP Journal of Manufacturing Science and Technology 5:108–126 Denkena B, Lucas A, Bassett E (2011) Effects of the cutting edge microgeometry on tool wear and its thermomechanical load. CIRP Annals – Manufacturing Technology 60:73–76

Influence of cutting edge geometry on tool wear performance in interrupted hard turning C.E.H. Venturaa,∗, J. Köhlerb, B. Denkenab

Influence of asymmetric cutting edge roundings on surface topography O. Maiss1 • T. Grove1 • B. Denkena1 Received: 10 March 2017 / Accepted: 15 May 2017 © German Academic Society for Production Engineering (WGP) 2017.

Influence of different asymmetrical cutting edge microgeometries on surface integrity Eric Segebadea,*, FrederikZangera, Volker Schulzea.


Refbacks

  • There are currently no refbacks.