SWITCH OPERATED GEAR SHIFTING MECHANISM

Abstract

In this project, we aim at developing easy gear shifting mechanism for transmission which will make motor bike rider’s gear shifting very easy. Everyone desires for the smooth running of the vehicle whatsoever may be the speed of pickup of the vehicle a person is operating, but one of the most important systems which every engineer is concerned about in vehicle is gear shifting system for ensuring smooth and desired ride on their two wheelers. Some simple mechanism is arranged with the servo motor and solenoid plunger which will help us to change be the speed of pickup of the vehicle a person is operating, but one of the most important systems which every engineer is concerned about in vehicle is gear shifting system for ensuring smooth and desired ride on their two wheelers. Some simple mechanism is arranged which will help us to change the gear as per the desired torque. The up-shifting and down-shifting of gears is done with the help two independent switches. These two switches are connected to stepper motor the gear as per the desired torque. In this gear shifting mechanism, gear shifting is done with the help of two solenoid plungers. During this mechanism the clutch is operated by a servo motor which is controlled by the module feed in the Arduino. The up shifting and downshifting of gears is done with the help two independent switches. These two switches are connected to solenoid plungers via Arduino and mosfet. Arduino Uno is an electronic modulator board which is used to take input from switches and potentiometer and control servo motor and solenoid plungers. The main objective of this paper is used to bring automation in gear shifter of two wheelers using stepper motor. This is the new innovative model mainly used for the vehicles to control the vehicle. Here we are concentrating to design the automatic gear changing mechanism in two wheeler vehicles by using the components like gear box, stepper motor, battery, electronic switch etc. This is very useful and unique method for the gear changing mechanism in two wheeler vehicles. By using this we can easily control the bike through button which will give instruction to stepper motor through programming we going to achieve to control motion i.e. Clockwise or anticlockwise by some specific angle. In this project, we aim at developing easy gear shifting mechanism for transmission which will make motor bike rider’s gear shifting very easy.